MM-13- rev 01-EN
22
OPERATION
Operating conditions
G Line generators are intended for industrial use.
Ambient temperature limits are -25°C +40°C.
Maximum altitude is 1000 m. asl.
Special conditions may be provided for, in this case they are mentioned on the sheets given for any
single generator.
Safety notice
The generator must be installed and used by skilled personnel familiar with the
safety requirements.
Accident-prevention devices necessary to prevent injuries during assembling and
operation of the generator on the system, must be in accordance with the accident-
prevention rules locally in force.
Checks during operation
Variations as regards normal operation (anomalous current input, high
temperature or vibrations, unusual noise or smell, tripping of the protection
devices) are indicative for wrong operation.
In this case, to avoid injuries to people or material damage, immediately stop
the generator, perform the necessary checks and carry out maintenance.
If necessary, contact ELECTRO ADDA SpA
In order to operate correctly, the electric generator must be submitted to proper care and
maintenance.
Before starting the generator it is necessary to check the following
Bearings are lubricated according the directions mentioned in the plate, data
sheets or drawings
The cooling system is efficient and in operation
No maintenance works are in progress
Personnel and equipment associated with the generator are ready for starting
NOTE: During full load operation, some generator parts might be hot.
