8
REMOTE CONTROL DIAGRAM
NOTICES FOR REMOTE CONTROL:
1. Do not place the remote control near high temperature heat sources.
2. Do not leave the remote control exposed to the direct sunshine.
3. Be careful not to drop the remote as this may lead to damage.
4. There must be no barrier between the signal receiver and remote
control as this may affect communication between them.
5. Do not allow the remote control to be splashed or immersed in water.
6. Do not place heavy items on top of the remote control.
Note: In case of failure of the remote control, please remove the back
cover and replace the batteries, before repeating the operation; if the
failure still exists, please run the air conditioner using the emergency
operation method, and contact the manufacturer or retailer.
VERTICAL SWING
(Dependant on Model)
Press to activate the vertical swing.
LOCK
Press to lock the buttons on the
remote.
CLOCK
Press to adjust the current time.
LIGHT (Dependant on Model)
Forced closing or lighting of display
panel. Decide whether to have this
function according to the actual
model.
HORIZONTAL SWING
(Dependant on Model)
Press to activate the horizontal
swing.
SLEEP (Dependant on Model)
The air conditioner will enter sleep
mode.
TIMER
Turn the timer ON/OFF.
ECON
Automatically sets the desired
temperature to 26
℃
in cooling or
heating mode.
TURBO (Dependant on Model)
Enter the turbo function for enhanced
short term performance.
REDUCE FAN SPEED
Reduce the fan speed by one level.
Please note: When on the lowest fan
speed it will change to auto.
Pressing again will change the unit
to high
POWER
Turn the appliance On / Off.
INCREASE FAN SPEED
Increase the fan speed by one level.
Please note: When on the highest
fan speed it will change to auto.
Pressing again will change the unit to
low.
REDUCE TEMPERATURE
Decrease the desired temperature.
MODE
Select between automatic, cooling,
dehumidification, fan and heating
modes.
INCREASE TEMPERATURE
Increase the desired temperature.