I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L | 0 5
Important Safety Instructions (continued)
contact Electrify America or Electrify Canada. Electrify America and Electrify
Canada are not responsible for any damages that may occur resulting from
custom installations or operations that are not described in this document.
10. Personal Protection Equipment: Use of proper personal protection equipment,
including, but not limited to, eye protection, shock protection, gloves, and other
appropriate protection, is recommended when installing or servicing any electrical
equipment. To reduce the risk of fire, only connect this equipment to a maximum
50 amperes overcurrent protection device in accordance with the National
Electrical Code, ANSI/NFPA and the Canadian Electrical Code.
11. Do not use this equipment in an area with hazardous or flammable materials
or vapors.
12. Arcing component in contactor: The charger includes contactors that, when
opened or closed, will cause a short duration arc. The contactor is enclosed
in an appropriate electrical enclosure, but caution is required if this arc occurs in
the presence of flammable vapors —as the vapors could ignite, creating an
explosion. Store hazardous and flammable vapors and materials away from
all electrical equipment. If hazardous or flammable sources are present, allow
sufficient time for ventilation before operating the charger.
13. Do not open the charger at any time during installation or operation!
Only trained personnel should open the charger.
14. Handling live components incorrectly may cause grievous injuries or death.
15. If the electricity service to the charger is damaged, immediately shut down
the power to the charger by switching off the circuit breaker and contact a
licensed electrician.
16. Turn off circuit before remounting or replacing the charger.
17. To reduce the risk of fire, connect only to a circuit provided with the proper
maximum branch circuit overcurrent protection in accordance with the National
Electrical Code, the Canadian Electrical Code and local laws, regulations, codes,
and standards.
18. Ensure that all components are dry throughout the installation.
19. Product subject to modification without prior notice. This document might not
contain the latest changes to the product’s specifications or processes described
herein. For the most up-to-date information, please visit
electrifyhome.ca
.
6
EMC Compliance Statement:
IC, CAN ICES-002(B) / NMB-002(B)
IC ID: 26750-R040JPA1000
1. Canada, Industry Canada (IC) Notices This device complies with Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired
operation of the device.
2. Radio Frequency (RF) Exposure Information The radiated output power of the
Wireless Device is below the Industry Canada (IC) radio frequency exposure limits.
The Wireless Device should be used in such a manner such that the potential for
human contact during normal operation is minimized. This device has also been
evaluated and shown compliant with the IC RF Exposure limits under mobile
exposure conditions. (antennas are greater than 20cm from a person's body).
