manualshive.com logo in svg

Electra TG50B, Руководство по эксплуатации

Поделиться
Скачать
Electra TG50B Скачать руководство пользователя страница 28

28

3.1 Cleaning

Be sure that all control switches 

are off and your appliance has 

cooled before cleaning your oven. 

Switch off  the appliance. Check 

whether cleaning materials are 

appropriate and recommended by 

the manufacturer before using on 

your oven. As they may damage the 

surfaces, do not use caustic creams, abrasive cleaning powders, 

thick wire wool or hard tools. Should any liquids overflow,  clean 

the overflown liquids immediately to avoid enameled parts 

becoming damaged.

Cleaning of oven

The inside of enameled ovens are best cleaned when the oven 

is warm. Wipe the oven with a soft cloth that has been soaked 

in soapy water after each use. Later re-wipe it with a wet cloth 

and dry. It may be required to use a liquid cleaning material 

from time to time to completely clean. Do not clean with dry/

powder cleaners or steam cleaners.

Catalytic cleaning (If available)

Catalytic cleaning involves a coating, which is applied to the 

oven cavity. The catalytic liners eliminates small grease residues 

during cooking at high temperatures. If grease residues remain 

after cooking, these can be eliminated by using the oven empty 

at 250

0

C for one hour. There are limitations to the level of the 

PART-3: CLEANING AND MAINTENANCE

Содержание TG50B





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды