manualshive.com logo in svg

Electra TG50B, Руководство по эксплуатации

Поделиться
Скачать
Electra TG50B Скачать руководство пользователя страница 17

17

components, always use the seals provided in the gas conversion 

kit. The seals used during connection should also be approved 

to be used in gas connections. Do not use plumbing seals for 

gas connections.

Remember that this appliance is ready to be connected to the 

gas supply in the country for which it has been produced. The 

main country of destination is marked on the rear cover of the 

appliance. If you need to use it in another country, any of the 

connections in the figure below can be required. In such a case, 

contact local authorities to learn the correct gas connection.

Gas Pipe

Gas Pipe

Gas Pipe

Gas Pipe

Seal

Seal

Seal

Hose 

Fitting

Adapter

Adapter

Gas Hose

with Collar

Mechanical

Gas Hose

Mechanical

Gas Hose

Mechanical

Gas Hose

It is required that an authorized service agent makes the 

appropriate gas connections in compliance with safety standards.

ATTENTION! Do not use any match or lighter to check for 

gas leaks.

Changing the gas inlet

For some countries, the gas inlet type can be different for NG/LPG 

gases. In such a case, remove the current connection components 

and nuts (if any) and connect the new gas supply accordingly. In 

all conditions, all components used in gas connections should 

be approved by local and/or international authorities. In all gas 

Содержание TG50B





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды