Electra Hydrive, Руководство пользователя

Страница: 22 / 90

ENGLISH
EN - 4
Hub motor
2.5 Maintenance and cleaning
Maintenance
X Only use genuine Hydrive batteries and
battery packs, or battery packs approved for
use with your e-bike by the manufacturer,
and purchase only from approved vendors.
Use of uncertified battery packs may result
in death or severe injuries.
X Remove the battery pack before performing
any inspections, maintenance or repairs on
the bicycle; inspecting, maintaining or
repairing the bicycle before removing the
battery pack may result in severe injuries.
Unexpected activation of the e-bike system
may result in severe injuries.
X
Do not dismantle the battery pack; doing
so may result in short-circuiting the battery
system. Dismantling of the battery pack
will void all warranties.
X
Do not immerse the e-bike system or any
individual e-bike component in water, and do
not wash any e-bike component with high
pressure washing equipment.
X
Do not paint the Hydrive e-bike system;
doing so may cause permanent damage to
the system.
Cleaning
Do not immerse the e-bike system or any individual
e-bike component in water, and do not wash any
e-bike component with high pressure washing
equipment. The system is designed to operate in
rain and other adverse weather conditions.
Damage due to pressure washing or other heavy
cleaning may void the Hydrive system warranty.
Keep all components of the e-bike clean, especially
the electric contacts on the battery pack and frame.
Use a soft, damp cloth to clean them thoroughly.
Item Specification
Degree of
protection IPX4 (splash water
protected)
Weight (approx) 6.4 lb / 2900 g
2.3 Assembly
For installation or removal of the battery pack,
please refer to the Battery section of the Hydrive
Owner’s Manual.
2.4 Operation
Initial operation
The e-bike system can only be activated when
the following requirements are met:
- A sufficiently charged battery is installed.
- The display unit is correctly connected and
installed on the handlebar.
Switching the E-bike system On / Off
Options for switching on the e-bike system:
- Press the power button on the display when the
bicycle battery is installed.
- Press the power button on the battery pack.
Once the e-bike system is switched on, the system
will default to the “off” mode; select the desired
assist level using the up and down arrows and
start riding.
Once you begin pedaling, the hub motor will
provide assistance to help the e-bike accelerate
and maintain speed.
For further information, refer to the Display
section of the Hydrive Owner’s Manual.
596221_Electra_Hydrive_E-bike_Owner's manual_Driver_EN.indd 4 18-Apr-19 11:05:01
20