Electra Meccanica SOLO, Руководство для экстренных служб

Страница: 38 / 46

36
MOVING THE VEHICLE
MOVING THE VEHICLE
Moving Off the Road
Deactivating the Electronic Parking Brake (EPB) requires pressing the brake pedal. Once the
vehicle is in N (Neutral), the EPB is disengaged, and the brake pedal is released, the vehicle will be
free-rolling. Be aware that the vehicle could roll at this point if it is not on a level surface.
Pushing the vehicle with wheels on the ground should only be done for very short distances, as
prolonged rolling (e.g. towing with wheels on the ground) can cause heat damage to the drive
motor system and generate high voltages in the electrical system.
If the vehicle needs to be moved a short distance but cannot be driven normally:
1. Set the Drive Mode Selector to N (Neutral) to allow the wheels to roll freely. See “Shifting Into Neutral”, page 8 .
2. Manually disengage the Electronic Parking Brake (EPB) or set the EPB to Maintenance Mode. See “Applying the
Electronic Parking Brake (EPB)”, page 9 .
3. Push the vehicle to move it where needed.
4. Engage the EPB or disengage the EPB Maintenance Mode.
5. Chock all three wheels to stabilize the vehicle. See
“Chocking the Wheels”, page 11 .
WARNING
CAUTION