Electra Meccanica SOLO Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 46

background image

38

MOVING THE VEHICLE

Using the Recovery Eye

Before pulling the vehicle, always ensure that the recovery eye bolt is fastened securely.

In the event that the vehicle needs to be pulled onto a flatbed trailer or transporter, a recovery eye assembly is
supplied for this purpose. Once assembled, a towing line (e.g. a strap, chain, or cable) can be attached to the recovery
eye and used to pull the vehicle onto a transporter.

1. The recovery eye bolt is located in a concealed

storage space in the left corner of the trunk floor. Pull
up on the carpeted cover to reveal and remove the
bolt.

2. When facing the front of the vehicle, the recovery

eye is located behind a cover to the right of the grill.
To remove this cover, insert a flat-bladed tool (such as
a screwdriver) into the slot along the edge, then
gently pry up until it releases.

3. Insert the bolt fully into the recovery eye, then turn

clockwise until it is tightly fastened.

CAUTION

«
...
38
39
40
41
42
...
»

Содержание SOLO















































Отзывы:

Нет отзывов

Похожие инструкции для SOLO

Бренд: Valor Fires Страницы: 17

Бренд: Magnitone Страницы: 24

Бренд: S&P Страницы: 24

Smart-Shave 07061-900

Бренд: Wahl Страницы: 2

Бренд: Logik Страницы: 16

Бренд: KING Страницы: 19

Бренд: Hitachi Страницы: 29

Бренд: Hitachi Страницы: 40

Бренд: Hitachi Страницы: 9

Бренд: Trotec Страницы: 16

Oral-B Smart 4000

Бренд: Braun Страницы: 11

Бренд: Valor Fires Страницы: 20

Бренд: Valor Fires Страницы: 24

Бренд: Zelmer Страницы: 40

Бренд: Maxwell Страницы: 46

Бренд: Pahlen Страницы: 16

Бренд: Pepcare Страницы: 40

Microflex R-200

Бренд: Remington Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды