Electra Meccanica SOLO Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 46

background image

7

IMMOBILIZING/STABILIZING THE VEHICLE

IMMOBILIZING/STABILIZING THE VEHICLE

Drive System Status (READY Mode)

Note: This vehicle will creep forward or backward when the brakes are not applied and the Drive Mode is in D (Drive) or
R (Reverse).

The READY indicator on the instrument cluster display signifies that the drive system is powered on and available.

To put the vehicle into READY mode:

1. Close both vehicle doors and fasten the seat belt.

2. Insert the key into the key switch. See

“Using the Key Switch”, page 24

3. Press down on the brake pedal until it is fully depressed and hold it down.
4. Without moving the steering wheel, turn the key to the

ON

position. The display will show the ElectraMeccanica

logo, then load the instrument cluster display. All indicators will flash briefly.

Note: Do not move the steering wheel while cycling the key switch from OFF to ON, as this can result in a fault. If this
occurs, turn the key switch to OFF, then cycle to ON without touching the steering wheel.

5. Ensure that the Drive Mode Selector is set to

N

“Shifting Into Neutral”, page 8

Note: If the Drive Mode is not currently set to N (Neutral), you will be prompted to do so by the display.

6. Turn the key to clockwise past the

ON

position to the

START

position.

Note: If the brake pedal is not currently pressed, you will be prompted to do so by the display.

7. Allow the key to return to the

ON

position. The

READY

indicator will illuminate on the instrument cluster display.

The vehicle is now ready to be driven.

Note: The Electronic Parking Brake (EPB) will disengage automatically when the vehicle is in READY mode, the Drive
Mode Selector is in D (Drive) or R (Reverse), and the accelerator is pressed.

To power down the drive system, turn the key to the

OFF

position.

Note: The EPB will automatically engage when the key switch is turned to the OFF position.

SWITCH

SET

N

15:09

06

75

96%

Mph

82˚

F

TRIP

miles
miles

Charge

Power

Power

Regen

Charge

READY

«
...
7
8
9
10
11
...
»

Содержание SOLO















































Отзывы:

Нет отзывов

Похожие инструкции для SOLO

Бренд: Team Durango Страницы: 32

Бренд: Conair Страницы: 8

Бренд: SASSOON Страницы: 3

Бренд: Panasonic Страницы: 16

Бренд: Panasonic Страницы: 24

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 18

Бренд: Tesco Страницы: 2

Бренд: Remington Страницы: 2

HYPERFLEX XR1430

Бренд: Remington Страницы: 128

Бренд: Remington Страницы: 12

Бренд: Remington Страницы: 144

Girls on the Go! WSF4813AU

Бренд: Remington Страницы: 6

Бренд: Remington Страницы: 14

ToothWave H7001

Бренд: Home Skinovations Страницы: 76

Бренд: Axis Страницы: 41

Бренд: Braun Страницы: 10

Бренд: GINNY’S Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды