Electra Meccanica SOLO, Руководство для экстренных служб

Страница: 11 / 46

9
IMMOBILIZING/STABILIZING THE VEHICLE
Applying the Electronic Parking Brake (EPB)
The EPB has both manual and automatic functions. It is manually controlled by a rocker switch on the dashboard, to
the right of the steering wheel.
When the EPB is engaged either manually or automatically, the EPB indicator will illuminate on the instrument
cluster display.
Note: The EPB can only be engaged or disengaged manually when the vehicle's speed is less than 2 mph (3 km/h) and the
key switch is in the ON position.
Note: The EPB can be engaged in any Drive Mode Selector position.
Using the EPB manually
To engage the EPB manually:
1. Ensure that the vehicle is moving at less than 2 mph (3 km/h) and the key switch is in the ON position. See “Using
the Key Switch”, page 24 .
2. Pull out the EPB switch.
To disengage the EPB manually:
1. Ensure that the vehicle is moving at less than 2 mph (3 km/h) and the key switch is in the ON position. See “Using
the Key Switch”, page 24 .
2. When in READY mode: Press the brake pedal, then push in the EPB switch. See “Drive System Status (READY
Mode)”, page 7 .
3. When not in READY mode: Press the brake pedal, then push and hold the EPB switch for 30 seconds.
Note: If the 30-second long push of the EPB switch is interrupted, you must repeat it for the full 30 seconds.
Note: While holding the EPB switch, the “Start Vehicle” system message will appear on the instrument cluster display.
P