Page 12 of 12
5.
Where Do I Go From Here?
Once you have read and completed the steps in this
, you can go on to configure your RediGate according to the needs of
Getting Started Guide
the system. There are a number of example configurations and tutorials on the
that walk you through connecting
http://partner.elecsyscorp.com
your RediGate to common field devices (such as Modbus) and host platforms (such as Ignition and IBM Bluemix/Watson).
The RediGate documentation consists of a set of manuals covering the hardware, configuration, diagnostics, protocols, and programming of the
RediGate products. The component manuals are described below, and most of them are available on the
website.
http://partner.elecsyscorp.com
Getting Started Gu
ide
Gives a product overview and instructions to the first-time user to get started using the RediGate.
RediGate Hardwar
e Manuals
Contains specifications, jumper settings, and connection diagrams for the RediGate's standard and optional hardware
components.
ACE Operation
Manual
Contains installation and user instructions for the Advanced Configuration Environment software, which is used to
configure the RediGate.
Configuration
Manual
Gives detail on the standard configuration options of the RediGate product.
Diagnostics
Manual
Describes the RediGate's diagnostic capabilities and user interface.
POD Programming
Manual
Provides instructions on using POD programming features in the RediGate configuration.
Elecsys ISaGRAF
Manual
Includes instructions on using the ISaGRAF programming software, with functions specific to the RediGate product.
Protocol Manuals
Individual protocol manuals describe the configuration settings and usage information for several of the master or slave
communication protocols supported by the RediGate.
If you are using the Elecsys HCP2 or OPC Appliance, refer to the separate product documentation for those software applications.
