Page 11 of 12
1.
2.
3.
4.
5.
We are constantly adding new protocols, host platforms, and features to the RediGate platform, so it is a good idea to check and make sure your
RediGate software is up-to-date.
Download the "Latest Update Tarball" for your RediGate 100 Series or 400 Series device from
http://partner.elecsyscorp.com
Open up your device's configuration using ACE
Select "File Upload XML to Device", and make sure the "Upload additional file(s)" box is checked
Click "Upload", "Add File", and then select the downloaded tar.gz file
After the upload, you device will reset and contain the latest firmware
Do not change tar filename
In order for the .tar to be properly installed, you must upload the file with its original filename. Uploading a file with a space in it
(such as 2017-01-03-1400-RegiGate_400_7_ZEUS_3.12_07 (1).tar.gz ) will prevent the RediGate from properly installing the
update, and may cause issues with future updates.
Confirm Software Version
You can confirm the version of software on your RediGate by logging into Putty. The screenshot below shows a RediGate with
V:5.7.2016-12-29-1000:
