manualshive.com logo in svg

Elecrow Crowtail Deluxe Kit, Руководство пользователя

Поделиться
Скачать
Elecrow Crowtail Deluxe Kit Скачать руководство пользователя страница 40

38

STEP1: 

Connect Crowtail-Bright LED and 

Crowtail-Buzzer to D1 and D2 port of 
Crowtail-ESP8266 Node MCU.

Hardware Connection

STEP2: 

Connect Crowtail-ESP8266 Node 

MCU to PC with a micro USB cable. The 
complete connection is as follows. 

For ESP8266 Node MCU, We will 
use luaEditor to edit the code and 
use LuaLoader to compile and upload 
the code file. Go to the 
"P18_ESP8266_Web_Server" 
directory, then go to the "Tool" 
directory and open the application 
named "LuaLoader.exe" located in 
the "LuaLoader (version 0.90)" folder. 
Then, you will see the software 
window as below:

It also has auto-reset so no noodling with pins and reset button 
pressings. To make it easy to use for portable projects, we added a 
connector for 3.7V Lithium polymer batteries and built-in battery 
charging. You don't need a battery, it will run just fine straight from the 
micro USB connector. But, if you do have a battery, you can take it on 
the go, then plug in the USB to recharge. The board will automatically 
switch over to USB power when it's available. Comes fully assembled 
and tested, with a USB interface that lets you quickly use it with the 
Arduino IDE or NodeMCU Lua. (It comes preprogrammed with the Lua 
interpreter) We also toss in some header so you can solder it in and 
In this lesson, we will learn how to use the wifi function of Crowtail- ESP8266 Node MCU module to 
control the LED and buzzer, but actually you can control more other devices you want.

plug into a solderless breadboard.

Crowtail - ESP8266 Node MCU x1
Crowtail - Bright LED x1
Crowtail - Buzzer x1

Crowtail - Cable x2
Micro USB Cable x1

Required Parts

Содержание Crowtail Deluxe Kit
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды