Elecrow Crowtail Deluxe Kit, Руководство пользователя

Страница: 13 / 47

11
STEP1: Plug the Crowtail-Motor Base Shield
onto the Arduino or Crowduino board.
Hardware Connection
STEP2: Connect the two Micro-Speed Motor
to motor interface of Crowtail-Motor Base
Shield. The OUT1 and OUT2 interfaces are
connected to the same motor positive and
negative poles, and the OUT3 and OUT4
interfaces are connected to the same motor
positive and negative poles.
Our Crowtail-Motor Base Shield includes 2 motor interfaces,
which can drive two motors at the same time! Of course, a
4-wire stepper motor can also be driven. After inserting the
Crowtail-Motor Base Shield into Arduino/Crowduino, the specific
method of controlling the motor is as follows:
In this course, we will use the Crowtail-Motor Base Shield motor interface to control two TT motors
simultaneously. This includes not only controlling the on or off of the motor, but also the speed of the
motor, which means that you can implement controls such as turning. Add "legs" to your smart car!
Arduino Uno/Crowduino Uno x1
Crowtail - Motor Base Shield x1 Micro-Speed Motor x2
Jumper wire x4
Required Parts