manualshive.com logo in svg

Elecrow Crowtail Deluxe Kit, Руководство пользователя

Поделиться
Скачать
Elecrow Crowtail Deluxe Kit Скачать руководство пользователя страница 19

17

STEP1: 

Plug the Crowtail-Motor Base Shield onto the Arduino or Crowduino board.

Hardware Connection

STEP2: 

Connect Crowtail-RGB-LED to D3 port 

of Crowtail-Motor Base Shield. The complete 
connection is as follows.

Open the downloaded folder 
“Crowtail Deluxe Kit for Arduino 
demo code”, navigate to the folder 
“lib”, and add “Adafruit_NeoPixel” 
folder to the Arduino library. Open 
the 

P07_Colorful_RGB_Light

 with 

Arduino IDE and upload it.

You will see that the dots on the Crowtail-RGB-LED will be filled with the same color in turn, first red, 
then green, and finally blue. Next, the RGB LED will light up in different colors like a rainbow.

What will you see

The Crowtail- RGB-LED module with 4 pcs of WS2812B 
which is a Chainable & Addressable LED. Users can 
control all the LEDs with only one pin! Besides, the LED 
bar can be also chainable, that is, you can connect 
more than one LED bar to make your project more 
dreamful. In this module, you can control every LED 
with different colors at the same time.
Have you ever imagined that you have a colorful magic ball? Put this Crowtail-RGB-LED into a 
transparent sphere to achieve this effect! Maybe with some music, you will feel like being at the concert.

Lesson 7 – Colorful RGB light

Introduction

Arduino Uno/Crowduino Uno x1
Crowtail - Motor Base Shield x1

Crowtail - RGB-LED x1
Crowtail - Cable x1

Required Parts

Содержание Crowtail Deluxe Kit
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды