![background image](http://html1.mh-extra.com/html/elecro-engineering/poolsmart-plus/poolsmart-plus_installation-and-operating-manual_2378739008.webp)
www.elecro.co.uk
1
ENGL
IS
H
7
Time Switching Delay
To prevent overheating of the switch components within the heating
device caused by frequent on/ off switching (cycling) the controller has
been pre-programmed with a time delay function.
When time switching delay is activated the message display will show
‘HEATER DELAY’ for 2 minutes.
Differential
When the pool water has reached the required temperature the
heating device will switch off and will not switch back on until the water
temperature has fallen 0.6°C below the require temperature.
Operating Modes
There are five operating modes:
The required Modes are selected
by touching the ‘M’ button
key, each touch causes the mode
to change to the next mode. The
display will indicate which mode
is currently selected together
with the clock time.
(Example illustrated ‘INSTALLATION’
mode)
Normal
Timer
Priority
Installation
Standby