![background image](http://html1.mh-extra.com/html/elecro-engineering/poolsmart-plus/poolsmart-plus_installation-and-operating-manual_2378739014.webp)
www.elecro.co.uk
13
Probe Calibration Setup
After selecting ‘EXIT’ for the timer setup the display will then show ‘PROBE
CAL’ touch the ‘O.K.’ Button key to select, touch the ‘UP’ / ‘DOWN’ button
keys to increase or decrease the temperature calibration adjustment, touch
the ‘O.K.’ Button key to select, the display will then revert back to show
‘PROBE CAL’
ENGL
IS
H
Probe calibration is usually not
required. However should you need to
make an adjustment take a
temperature reading from the pool wa-
ter with an accurate thermometer then
adjust as required.
Example:
Actual Water
Temp
PoolSmart
Plus Reading
Adjustment
Required
28
30
-2.0
28
26
2.0