www.elecro.co.uk
19
Priority of Heating Mode
To activate the ‘Priority of Heating’ mode touch the ‘MODE’ button
key until the ‘PRIORITY’ symbol is displayed, the message ‘FLOW
STABILISING’ will be displayed, after two minutes the display will
change to show ‘SAMPLING’ and after a further two minutes the
display will change back ‘PRIORITY’
ENGL
IS
H
Once the ‘Priority of Heating’ feature has been enabled the controller will
take a water temperature sample every hour and the message ‘SAMPLING’
will be displayed.
If the pool water temperature is below the required temperature, the
controller will send a signal to the heating device to come on until the
required temperature is reached. When the required temperature is
