Elecro Engineering Koolsmart PLUS, Инструкция по установке и эксплуатации

Страница: 4 / 19

4
2. GENERAL INSTALLATION INSTRUCTION
Screw mount the Koolsmart Plus to a suitable wall in a dry weatherproof location out of direct sunlight,
ensuring that it is sited no more than 1 metre from the flow sensor and temperature sensor parts on your
Elecro heat exchanger.
Fig 2.
The rear face of the Koolsmart Plus has an upper keyhole screw hook, located at the rear of the enclosure,
and 2 lower screw holes which are accessed after removing the 4 screws retaining the lower access cover
at the front.
2.1 Mounting instructions
The Elecro G2 and SST Heat Exchangers have common ports at both sides of the heat exchanger to
accommodate the NTC Temperature Sensor or the Flow Sensor.
It is important to ensure that the NTC Temperature Sensor is positioned on the water entry side of the heat
exchanger - see below.