Elecro Engineering Koolsmart PLUS, Инструкция по установке и эксплуатации

Страница: 8 / 19

8
The digital display will show
‘NORMAL’
and the
graphical red coloured thermometer will be
‘Animated’ whenever the chiller is switched
‘ON’
.
The actual pool water temperature is shown in the upper area of the display. The required temperature is
shown in the lower area of the display. The required water temperature can be adjusted by touching the
‘UP / DOWN’
touch button keys until the required temperature is displayed, adjustments are in 0.1°C
increments.
Time Switching Delay
To prevent overheating of the switch components within the cooling device caused by frequent on/ off
switching (cycling) the controller has been pre-programmed with a time delay function.
When time switching delay is activated the message display will show ‘
CHILLER
DELAY’
for 2 minutes.
Differential
When the water has reached the required temperature the chiller will switch off and will not switch
back on until the water temperature has fallen 0.6°C below the required temperature
.
Operating Modes
There are five operating modes:
Normal Timer Priority Installation Standby
The required Modes are selected by touching the
‘M’ button key, each touch causes the mode to
change to the next mode. The display will indicate
which mode is currently selected together with the
clock time.
(Example illustrated
‘INSTALLATION’
mode)