www.elecro.co.uk
6
EN
G
LIS
H
NOTE:
For Winterising / maintenance - it is recommended that the heat
exchanger is installed with isolation valves on both water input and out-
put sides of the primary and secondary circuits. This will allow the water to
be shut off on both sides and aid removal from the system, when
required.
Guarantee
Your Escalade welded heat exchanger is guaranteed for two years from the
date of purchase against faulty workmanship and materials.
ELECRO ENGINEERING LTD will replace or repair, at it’s discretion, any faulty
units or components returned to the company for inspection. Proof of
purchase may be required.
ELECRO ENGINEERING LTD will not be liable in cases of incorrect
installation, inappropriate use or neglect.
CE Declaration Of Conformity
The manufacturer declares that the herewith products or ranges.
HEAT EXCHANGERS
Are in conformity with the provisions:
of the ELECTROMAGNETIC COMPATIBILITY directive 89/336/EEC, as
amended 93/068/EEC. Controlled by AEMC Measures laboratory—
technical report no P96045T
The harmonised standards have been applied: EN 55014—EN 55104
EN 55011
EN 55022
CEI 801-4
CEI 801-2
CEI 801-3
of the LOW VOLTAGE directive 73/23/EEC.
The harmonised standards have been applied
EN 60335-2-35
Содержание Escalade Welded
Страница 1: ...Escalade Welded Heat Exchanger Installation Operating Manual ...
Страница 2: ...ENGLISH www elecro co uk ...