12
Remote Site Setup
1.
Apply power to the K3 and confirm that it has firmware version 4.47 or later installed. If not, update the
firmware as described in the K3 Owner’s manual.
2.
Set the K3 for rear panel mic input and no bias (see the K3 Owner’s manual for details), regardless of
the type of mic used. The RRC-1256 units automatically supply bias.
3.
Cable the remote K3 to the RR1256 unit as shown in Figure 9 using the RRMTCBL cable set. You must
use the RR1256 unit that
does not
have the CW knob on the front panel.
Figure 9
