7
Figure 4
4.
Click on the Setup tab to open the window shown in Figure 3.
Figure 3
5.
Click on the Get button to open the Setup Info window
(Figure 4), check and correct the following entries as
needed:
I.P. address:
This address should match those shown on
pg 5 for the RR-1256 unit you are programming. If
needed, you can enter a new I.P. address (for example, if
you already have another device on your LAN using the
address shown)
Gateway:
This must match the I.P. address of the router
that provides your network connection.
DNS Server:
This is normally the I.P. address of your
router but some internet service providers assign a
different address.
Web Server Port:
This is the port your web browser
uses to communicate with the RR-1256 unit to configure
further settings without your browser. To communicate
with the RR-1256 unit, enter the I.P. address assigned to
it (e.g. for the unit shown in Figure 4, enter
192.168.1.170).
6.
Repeat steps 1 through 5 to program the second RR-
1256 unit.
