Elecfreaks TOOCA Laser 1, Руководство пользователя

Страница: 12 / 32

Start Engraving
Offline Working
1. Insert the TF card with .gcode file(The machine reads the latest .gcode file in TF card by default. It is recommended to delete
other .gcode files before engraving) into the machine before powering on, insert one side of the power adapter into the power
socket that can be remotely switched on, and the other side into the power connector on the right side of the control box.
Lastly, turn on the red switch on the left side of the control box.
The machine supports real-time working by Type-C or offline working by TF card. Please follow the
assembly directions to focus correctly and wipe the protective lens of the laser module with dustless
cloth and alcohol to ensure the best engraving effect.
After powering on, it will "beep" once and reset. After the reset is completed, it will "beep" twice and enter standby mode.
Power switch
Protective lens
TF card socket
Power supply interface
5W
10W