Elecfreaks TOOCA Laser 1, Руководство пользователя

Страница: 11 / 32

5.1. Assemble 5W laser module: Assemble it into the fixing
plate and the fixed focus bar should contact with the
surface of the processed material when it is naturally
vertical downward. Then lock it with two hand screws on
the right and turn the fixed focus bar clockwise until it is
attracted by the magnet. Finally plug in the laser module
cord. 5.2. Assemble 10W laser module: Please place the
multi-level fixed focus bar between the laser module and
the processed material. Follow the tips and make the
bottom of the laser module contact with the correspond-
ing surface of the multi-level fixed focus bar. Finally lock it
with two hand screws on the right. For example, if you
engrave or cut a 2mm basswood:
Software Installation and Usage Guide
The TF card that comes with the machine contains the tutorials of LightBurn and LaserGRBL. You can get the relevant
information from the TF card.
Laser module cord
Laser module cord
Fixed focus bar
Multi-level fixed focus bar
2mm Basswood
2mm Basswood
The laser module must be installed and removed only when the power is off.