eldoLED DALI-to-DMX bridge, Руководство пользователя

Страница: 12 / 20

12
2.2 Setting the DMX network resolution
DMX network resolution (number of bits used to send a set point over the network) can be set
to either 8 or 16 bit via the bridge’s DIP switch 1. In 8-bit mode, every DALI ballast value is
translated into one 8-bit DMX channel. In 16-bit mode, two DMX channels are used per DALI
ballast value. 16-bit mode enables a 15-bit resolution fade, resulting in a smooth transition be-
tween set points, invisible to the human eye.
To set the network resolution for the DMX addresses to 8 bit, set switch 1 to OFF; to set the
network resolution for the DMX addresses to 16 bit, set switch 1 to ON.
Figure 2.1: DIP switches