eldoLED DALI-to-DMX bridge, Руководство пользователя

Страница: 15 / 20

15
4 Mounting the DALI bridge
4.1 Preparing the mounting surface
The DALI-to-DMX bridge can be mounted onto wood, plastic or metal. If you need to pre-drill
mounting holes into the mounting surface:
1. Place the DALI bridge onto the mounting surface in the desired position.
2. Indicate the position of the mounting holes on the surface by drawing them through
the bridge’s mounting holes with a pencil.
3. Take away the DALI bridge and pre-drill the screw holes in the mounting surface. .
4.2 Fastening the bridge to the surface
To fasten the driver/controller to the mounting surface:
1. The driver/controller has four mounting holes suited for M3 and M4 screws. Make sure
you have screws that are appropriate for the surface that you want to mount the bridge
onto. Use mounting screws with a minimum length of 15mm.
2. Place the bridge in the desired location, matching its mounting holes with the predrilled
screw holes on the mounting surface.
3. With a screwdriver, fasten the bridge to the surface..
Figure 4.1: Fastening the bridge to the surface
The DALI bridge’s mechanical dimensions are listed in appendix A “Specifi-
cations”.