Eldes ESIM110, Руководство пользователя, Страница: 6 / 40

6
2. System Pre-operation
and the Main Control Commands
VERY IMPORTANT!!!
Underscore symbol ‘_’ in this manual is used to represent space. When writing SMS messages, every underscore symbol should be
replaced by single space symbol. XXXX – means password. Don’t leave any space at the beginning and the end of the message.
To set Esim110 system parameters easier and quicker you can use the computer, USB cable and confi guration program Esim110
Confi gTool. You can read more in chapter 3.2.
2.1 Selecting device language and verifi cation of SMS central number
The language in which the device communicates with the user can be chosen before changing factory default password. To change
the language in the system that is already confi gured reset default settings as described in 3.1 appendix.
Send SMS message with the required language
code to the number of the SIM card inserted in
Esim110.
E.g., if you want to set the English language send
the following SMS message: EN
30-60 seconds later you should get an SMS message:
„English language confi rmed.“ Go to chapter 2.2 upon
reception of this message.
Otherwise check for network connection and call Esim110 system from your mobile and wait until the system drops the call. You
should get an SMS message asking to change default password. Ot- herwise check for network connection and change SMS central
number.
SMS central number is saved in SIM card, therefore if SIM card has been used to send SMS messages with a mobile phone,
then you don’t’ need to change SMS central number. Often SMS central number is already saved in SIM card by cellular
operator.
Central number can be entered by sending SMS message:
XXXX – is a password. Default password is four zeros: 0000. SMS central number is provided by cellular network provider.
Example: 0037069899992
Message should be sent to the number of SIM card which is placed into the system. If all went correct, the system will send a messa-
ge:
SMS central number has been successfully changed to +37011111111
2.2 Administrator Password Change
All SMS commands start with a password, please memorize it. Manufacturer default password is four zeros 0000, which is ne-
cessary to change! Manufacturer default password can be changed by sending the following SMS message to ELDES Esim110
system:
To replace your password send the following SMS message:
XXXX is any four digit number except four zeros. Non-numerical characters like dots, colons, spaces are not allowed. YYYY is the
old system password. If you forgot the password, default manufacturer password can be restored, see chapter 3.1 for more details.
Language Code
lithuanian LT
english EN
russian RU
Table of
possible
languages
ESIM 110
XX37011111111
0000_PSW_XXXX
YYYY_PSW_XXXX