Eldes ESIM110, Руководство пользователя, Страница: 10 / 40

10
2.10 Changing input names
Input names set by the manufacturer: Z1- Zone1, Z2-Zone2, Z3-Zone3. Any of these names can be changed by the user. The names
cannot repeat or coincide with control commands.
Input names can be changed by sending the following SMS message:
The user can change all names at once, several names or only one name. Maximum input name length
is 8 characters.
E. g. XXXX_Z2:OpenGate
2.11 Input arming/disarming
Input arming
Any of the inputs can be armed by sending the following SMS message:
E. g. XXXX_Z2:ON or XXXX_doors:ON
Input disarming
Any of the inputs can be disarmed by sending the following SMS message:
E. g. XXXX_Z2:OFF or XXXX_doors:OFF
2.12 Confi guring input impulse duration
Impulse duration can be changed for any IN1-IN3 input. The input is triggered only if impulse duration is longer than the pre-set
value. Duration set by the manufacturer is 600ms.
This parameter can be changed for every input or for all inputs at once by sending the following SMS message:
where TT means input reaction time in milliseconds. Possible TT values are 100-42000000. Measuring
is by 100.
E. g. XXXX_T3:300000 means that IN3 input will react only if the impulse was not shorter than 5mins.
XXXX_T1:TT_T2:TT_T3:TT
ESIM 110 XXXX_
T3:300000
XXXX_Z1:ON_Z2:ON_Z3:ON
XXXX_Z1:OFF_Z2:OFF_Z3:OFF
ESIM 110 XXXX_Z2:
ON
ESIM 110 XXXX_Z2:
OFF
XXXX_Z1:NewInputName_Z2:NewInputName_
Z3:NewInputName
ESIM 110 XXXX_Z2:
OpenGate