programming menu
system
runtime
groups
switch. times
Programming new switching times
You can define new switching times in
.
The numerical value behind " " indicates how
many free memory slots are still available ( -- =
all memory slots are occupied). You can program
only one switching time per direction of motion.
Changing existing switching times
Existing switching times are displayed under the
set time (e. g.
) in the menu item
. If
the switching time was selected by it can be
changed in the menu item
.
ADD, DEL, DISP, DELP
This is were channels/groups are defined which
shall be added to a new or existing switching
time. Only added channels/groups are cont-
rolled by a switching time.
1. Switching time
Press to open or add a switching time.
→ values to be set are blinking
→
appears at the bottom
1. Use
to switch between hour and minu-
te.
2. Use or number buttons to enter hour and
minutes.
3. Press the direction button to move on to
the next item.
This is were you define the switching time at
which a switching command will be carried out.
When editing existing switching times
you can save changes in the whole
menu immediately and return to
by pressing .
Abort programming by pressing ESC.
2. Weekdays
→ the weekdays are blinking
→
appears at the bottom
4. Use to select the desired weekdays.
5. Press
to move on to the next item.
(press to move back to the previous
item)
This is where the weekdays are defined at
which a switching command will be carried out.
The following settings are possible:
•
whole week (MO - SU)
•
work week (MO - FR)
•
weekend (SA, SU)
•
individual days (e. g. TH)
3. Direction of motion
→ the direction of motion
is blinking
→
appears at the bottom
6. Select the direction of motion or by
using .
7. Move on to the next item by pressing .
(move back to the previous item by
pressing )
The direction of motion of the shutters is de-
fined.
The following settings are possible:
•
raise the shutters ( )
•
lower the shutters ( )
4. Intermediate position
→ the intermediate position
is blinking
→
appears
8. Use to set the intermediate position in
steps of five. The percentages refer to the
runtimes, they are not the absolute position
of the shutter!
9. Press to move on to the next item.
(press to move back to the previous
item)
The intermediate positions define how far the
shutters raise or lower.
In case of the setting "100 %" at:
: the shutter is lowered and at
: the shutter is raised.
The percentage for the intermediate positions
is set in steps of five.
In order to be able to drive the shutters into an intermediate position, you have to measure the
runtimes of the respective channels in the
menu.
5. ASTRO function
→ the ASTRO function
is blinking
→
appears
10. Use the direction buttons to select the
ASTRO mode .
11. Press to save the set switching times
and quit.
When programming a new switching time
takes place a change in the menu
,
to add the switching time to the channels
(see „Configuring switching times“).
Please find detailed information about the
ASTRO function on the next page.
In order to use the Astro-function, the
following values you have to be set in the
menu correctly: time, date, coordi-
nates, time zone.
Configuring switching times
Adding channels/groups to
switching times:
A channel/group can be added to several
switching times.
1. Use
to select a switching time.
2. Press .
3. Use
to select the menu item
.
4. Press .
5.
Use to select the channel/group you want
to add to the switching time.
→ channels/groups that have already been
added cannot be selected
6. Press to save and quit.
→ move back to the menu item
7. If necessary, repeat the process in order to
add further channels/groups.
Deleting channels/groups from
switching times:
Deleted channels are no longer part
of the switching time.
1. Use
to select a switching time.
2. Press .
3. Use
to select a menu item
.
4. Press .
5.
Use to select the channel/group you want
to delete from the switching time.
6. Press to delete and quit.
→ move back to the menu item
7. If necessary, repeat the process in order to
delete further channels.
Displaying channels/groups of
switching times:
The menu item only serves for checking
purposes. You cannot change settings.
1. Use
to select a switching time.
2. Press .
3. Use
to select the menu item
.
4. Press .
5.
Use to display channels/groups.
6. Press or ESC to quit the menu.
→ move back to the menu item
Deleting a switching time
including all settings:
1. Use
to select a switching time.
2. Press .
3. Use
to select the menu item
.
4. Press .
5.
Use to switch to
.
(at
the switching time is not deleted)
6. Press to delete and quit.
→
is shown (2 s)
→ move back to the menu item
xx
5
