programming menu
system
runtime
groups
switch. times
SYS (system menu)
Includes all of the basic settings such as time,
location, temporal offset for sunrise/sunset,
time zone and number of the usable channels
on the device.
Entering system data
Setting the time:
1. Press to open the menu
item
.
→ clock icon appears at the bottom
→ values to be set are blinking
2. Use
to switch between hour, minute
and summertime/wintertime.
3. Use or number buttons to enter hour, mi-
nute and summertime/wintertime.
4. Press to save settings and quit.
Setting the date:
1. Press to open the menu
item
.
→ date icon appears at the bottom
→ values to be set are blinking
2. Use
to switch between day, month
and year.
3. Use or number buttons to enter day,
month and year.
4. Press to save settings and quit.
Entering the coordinates:
1. Press to open the menu
item
.
→ "ASTRO" appears above the indication
2. Use
to switch between
(latitu-
de),
(longitude) or
(time zone).
3. Press .
4. Use or number buttons to enter an inte-
ger value (-90 to 90, -180 to 180, -11 to 12
change sign with
, see page 6).
5.
Press to save settings.
6. Repeat the process for the other value or
quit with ESC.
Setting the offset:
Define a temporal offset to the calculated time of
sunrise (
) and sunset (
) in
.
1. Press to open the menu item
.
2. Use
to switch between
and
3. Press .
4. Use or number buttons to enter an
integer value (-120 to 120, change sign
with
).
5.
Press to save settings and quit.
6. Repeat the process for the other value or
quit with ESC.
Defining the number of channels:
1. Press to open the menu
item
.
2. Use or number buttons to select the desi-
red channel number
(max. 30).
3. Press to save settings and quit.
Measuring the runtimes
The shutter has to be raised completely
in order to start measuring the runtimes.
The runtime can be measured and overwritten
as often as desired for each channel.
For channels, where the runtime has already
been measured, the icon for the intermediate
position is shown in the menu
.
Measuring the runtime for
a channel:
1. Use
or the number buttons to select
the channel
for the runtime measu-
rement.
2. Press .
→
is shown
3. Press .
→ the shutter raises automatically and
→
is shown
Measuring the runtime to lower the
shutter
4. Hold pressed until the shut-
ter is lowered completely.
(
is shown)
Then, release the button.
→
is shown
Measuring the runtime to raise the
shutter
5.
Hold pressed until the shut-
ter is raised completely.
(
is shown)
Then, release the button.
→
is shown (2 s)
→ you return to the channel selection
→ the settings have been saved
6. Repeat the process, if necessary.
Deleting the runtime for
a channel:
The runtime can be deleted in order to use the
channel for other Easywave radio receivers.
1. Use
to select a channel.
2. Press .
3. Use
to select a menu item
.
(only available when a runtime has been
measured)
4. Press .
5.
Use to switch to
.
(at
the runtime is not deleted)
6. Press to delete the runtime and quit.
→
is shown (2 s)
→ you return to the channel selection (1.)
Defining groups
Adding channels to a group:
A channel can be added to several groups.
1. Use
to select a group.
2. Press .
3. Use
to select the menu item
.
4. Press .
5.
Use or the number buttons to select the
channel you want to add.
→ channels that have already been
added cannot be selected
6. Press to save.
→ you return to the menu item
.
7. If necessary, repeat the process in order to
add further channels to the group.
Deleting channels from a group:
Deleted channels are no longer in
the group.
1. Use
to select a group.
2. Press .
3. Use
to select the menu item
.
4. Press .
5.
Use to select the channel you want to
delete from the group.
6. Press
to confirm and quit.
→ you return to the menu item
7. If necessary, repeat the process in order
to delete further channels from the group.
Displaying channels of a group:
The menu item only serves for checking
purposes. You cannot change settings.
1. Use
to select a group .
2. Press .
3. Use
to select the menu item
.
4. Press .
5.
Use to display channels.
6. Press or ESC to quit the menu.
Deleting all channels from
a group:
1. Use
to select a group.
2. Press .
3. Use
to select the menu item
.
4. Press .
5.
Use to switch to
.
(at
the channels are not deleted from
the group)
6. Press to delete and quit.
→
is shown (2 s)
→ you return to the group selection (1.)
SPAN (measurement of runtimes)
The hand transmitter can move shutters to
intermediate positions. In order to use this
function, you have to measure the runti-
mes of the respective channels in this menu.
GRPS (groups)
Permits to combine several channels in groups
and to control them simultaneously. It is possib-
le to define up to 9 different groups (
to
).
4
