ELCOS SRL
- Parma - CEM-120 – PROG – EN
18
PROCEDURE FOR SWITCHING INSTRUMENTS AND FUNCTIONS ON AND OFF
Instruments and functions can be switched on or off using the following procedures.
KVOLTAMMETER
ENGAGED
OFF
KVOLTAMMETER
W
Press to choose.
Press to
display.
Factory setting
MANAGEMENT
OF FUEL W
PROGRAMMABLE
FLOAT
FUEL
To program or change
the
already programmed values, see
FUEL FLOAT PROGRAMMING
EXAMPLE
EXAMPLE
SWITCHING OFF OF INSTRUMENTS
(See above procedure)
Measurements produced by the
control unit CEM-120
FACTORY PROGRAMMING
SETTINGS
ON
OFF
WATTMETER
•
VARMETER
•
VOLTAMMETER
•
POWER FACTOR METER
•
KILOWATT-HOUR
•
TACHOMETER
•
THERMOMETER
•
OIL PRESSURE GAUGE
•
PROGRAMM.
CHOICE OF ALREADY PROGRAMMED FUEL FLOAT
VEGLIA
VDO
DATCON
W
Press
to choose.
FLOAT
LEVEL IN
TANK
OHM
VEGLIA
(factory setting)
FULL
0
FREE
300
VDO
FULL
150
FREE
0
DATCON
FULL
37
FREE
240
CHOICE OF
FUEL FLOAT
CHOICE OF FUEL FLOAT.
The control unit is programmed for a float with rheostat, suitable for
FUEL LEVEL indication.
MANAGEMENT OF FUEL W
It is possible to program the use of a
float with contact that closes to
ground when there is no fuel.
PROGRAMMING OF OHMIC VALUES OF FUEL FLOAT
It is possible to program 10 resistive values,
corresponding to the characteristic curves
of other floats.
PROGRAMMING OF CORRESPONDENCE
FLOAT TO BE PROGRAMMED
50%
- - - OHM
50%
- - - OHM
OHM
0% 10 20 30 40 50 60 70 80 90 100%
WRITE THE RESISTIVE VALUES
WRITE THE RESISTIVE VALUES
Decreases
Increases
WARNING
: It is necessary to program
at least 2 values (to obtain good
precision in the control of the fuel, we
recommend programming at least 4 values).
If just one value is programmed or
non-monotone values are programmed, the
fault is detected
.
INCORRECT
FUEL FLOT TABLE
OHM
Press briefly
to display
the programming
carried out.
Press to
display the function and the
instrument to be switched off.
Press to
display.
Press and wait for
PROGRAMMED to be
displayed.
Press and wait for
PROGRAMMED to be
displayed.
Press and hold
and wait for the
system to write
PROGRAMMED.