Elcon Elconnect next EAD 100w, Краткое руководство по эксплуатации

Страница: 31 / 36

EAD 100w
Version: 2013/04/03
29
Figure 13: Changing the WLAN key
To change the WLAN key, go to
WLAN → Security and enter the new WLAN key. Click on
the „
Apply
“ button and then on „
Save Settings
“. The WLAN Status LED on the EAD 100w
starts flashing and – after acceptance of the settings – shines or goes out permanently, accord-
ing to the set status.
4 Technical data
WAN interface
Ethernet-WAN 10/100Base-T
LAN interface (Ethernet Router)
Ethernet LAN 4 × RJ45; Auto MDI / MDIX; Transparent Bridging mode
DHCP static and dynamic IP address assignment
WLAN interface
Access Point acc. to IEEE802.11b/g
802.11g Data rate 54, 48, 36, 24, 12, 9, 9 Mbps
802.11b Data rate 11, 5.5, 2, 1 Mbps
Safety 64- / 128-bit WEP; WPA-PSK, WPA2-PSK, WPA, WPA2
Telephone services (analogue telephone interfaces)
Telephone sockets 2 × RJ11
Signalling SIP
Voice Codecs G.711
Supplementary services 3PTY; CLIP; CLIR; HOLD; CW etc.
Service quality & Security
Quality of service Diffserv; Type of Service, Class of Service
Firewall Network Address Translation (NAT); Port Forwarding