SnowClear Installation, Operator & Maintenance Manual
3
Replace Safety Labels
Replace missing or damaged safety labels so that operators are aware of hazards. Replacement signs are available
from Trecan Combustion Limited.
Maintain the Equipment
Ensure that the SnowClear Overhead Melter is maintained as instructed in this manual and is kept in proper
working condition.
Equipment Modifications
Do not modify the SnowClear Overhead Melter. Modifications could be detrimental to the operation of
the product, increase the risk of fire, affect equipment life and/or result in a safety hazard such as electric
shock and injury. Modifications could also void equipment warranty.
Installation and Maintenance
SnowClear Overhead Melter must be properly installed by a licensed and qualified
electrician before using. Ensure they fully understand the procedure and are
qualified to undertake any maintenance or service work. If unit is not functioning
properly, cease use immediately. Disconnect power at circuit breaker and have a
licensed and qualified electrician inspect before reusing.
Hazardous Voltage
Disconnect power supply at circuit breaker before any maintenance or service work.
If safety grills installed on the equipment must be removed for maintenance or
service, exercise caution. Always re-install the grills once the work is completed.
Never operate the equipment without the grills properly installed in their original
locations. Replace damaged or missing grills immediately to reduce your risk of
electrical shock or burns. Do not touch or operate the product with wet hands.
