elco TRIGON L PLUS, Руководство по эксплуатации

Страница: 73 / 108

73
Operation
Function Thermoregulation
Room temperature day / night
Function Thermoregulation
see Complete Menu activation of
automatic heating temperature control
(AUTO function). This function allows
the heating operation to be adapted to
external environmental conditions and
to the type of system in which it is
installed.
This allows to easily achieve high
comfort without unnecessary waste of
money, energy and efficiency and helps
to significantly reduce the wear of the
components.
Contact a qualified technician to inform
you about the device and then program
the system to meet your needs.
Thermoregulation OFF:
The boiler operates and provides a
constant flow temperature. The burner
modulates according to system load.
This is achieved by monitoring the
system return temperature.
Thermoregulation ON:
One outdoor sensor and/or a room
sensor (accessories) detect changes
the outside or room temperature.
The controller calculates the correct
flow temperature in order to achieve
the desired room temperature level
(e.g. 21 °C) to hold. This allows highest
Comfort and energy saving.
If a room thermostat or Room sensor
(accessory) used the boiler switches in
both cases (ON/OFF) according to the
current Room temperature on / off.
Room temperature day / night
The room temperatures (all zones 1-3)
can be set to different setpoints. These
setpoints become effective with the
selected operating mode and the time
program, so that different temperature
levels can occur in each zone.
The bandwidth of the adjustable
target values is limited by their
interdependence, which can be seen in
the accompanying graphic.
Day setpoint (comfort),
factory setting 21 °C
Night setpoint (reduced),
factory setting 16 °C