ELCA AR BRAVO-FUNK-915, Руководство пользователя

Страница: 29 / 32

ENG man BRAVO-FUNK-915 00 BRAVO-FUNK-915 Radio remote control system
- Page 23 -
ENGLISH
2
T723
JOY2
JOY3
JOY4
JOY5
JOY1
JOY6
JOY7
JOY8
RELATIONSHIPS BETWEEN JOYSTICKS
Some Joysticks are placed in relation to each other and are:
JOY1-JOY5 can not perform both functions simultaneously and JOY1 has priority over JOY5
JOY5-JOY8 can not perform both functions simultaneously and JOY8 has priority over JOY5.
JOY6-JOY7 can not perform both functions simultaneously and JOY7 has priority over JOY6.
8.2 SPECIAL FUNCTIONS IN DRILLING MODE (WORK)
HEAD 1 AUTOMATIC ROTATION PUSHBUTTON
Pushbutton P1 together with the Joystick JOY8 allows the automatic rotation on the rotation
of Head 1.
-
Activation sequence :
With JOY8 positioned out of zero, press pushbutton P1, release JOY8 and finally release P1.
The automatic rotation is now active and it is possible to vary the rotation speed of Head1 by
means of potentiometer POT2.
- Deactivation sequence :
Move JOY8 in the out of zero position and the rotation control of Head 1 returns to the
joystick. The automatic rotate function is switched off when exiting the drilling mode (work).
HEAD 2 AUTOMATIC ROTATION PUSHBUTTON
Pushbutton P1 together with the Joystick JOY7 allows the automatic rotation on the rotation
of head 2.
-
Activation sequence:
With JOY7 positioned out of zero, activate pushbutton P1, release JOY7 and finally release
P1. The automatic rotation is now active and it is possible to vary the rotation speed by
means of selector S21. There are 8 predefined speed levels, with an impulse of S21 on +
(upward) the speed increases and with - (downwards) decreases. When the radio remote
control is switched off the selected speed value is stored and made available for the next
work session.
- Deactivation sequence :
Move JOY7 in the out of zero position and the rotation control of Head 2 returns to the
joystick. The automatic rotate function is switched off when exiting the drilling mode (work).
SELECTION OF THE OPERATING MODE
The selector S13 selects the operating mode of the machine:
Upon activation of the radio link with the receiver, this switch should be centrally positioned in the
PLACING mode.
MOVEMENT
Only the functions shown on a White and Orange background are active in this
operating mode. All others are deactivated.
PLACING
Only the functions shown on a White and Yellow background are active in this
operating mode. All others are deactivated.
DRILLING (WORK)
Only the functions shown on a White and Blue background are active in this
operating mode. All others are deactivated. The activation of the working mode with
selector S2 active, causes the error signal given by DL1 "Option Check" that flashes
rapidly and all outputs off.