Elbur PB 636 IV, Инструкция по эксплуатации

Страница: 30 / 36

PB 636 IV
Elbur sp. z o.o. sp.k. 30 of 36
2.1. Measurement of protective earth resistance
Applied only for Class I ME equipment
𝑅 ≤ 300 𝑚𝛺
□ YES □ NO
Results:
2.2. Measurement of leakage current
Direct method (for Class I ME Equipment)
𝐼 ≤ 500 𝜇𝐴
□ YES □ NO
Results:
Differential method (for Class II ME Equipment):
𝐼 ≤ 100 𝜇𝐴
□ YES □ NO
Results:
2.3. Measurement of insulation resistance
For Class II ME Equipment:
𝑅 ≥ 7 𝑀𝛺
□ YES □ NO
Results:
Description of defects (if applicable):
_______________________________________________________
_______________________________________________________
_______________________________________________________
III. Performance check
3.1. Performance check of the electrical components
Are control and blocking functions of the hand switch
working properly?
□ YES □ NO
Are drive units working properly? (abnormal noises,
smooth operation)
□ YES □ NO
3.2. Performance check of the mechanical components
Is suspension system working properly? (smooth
operation, brakes)
□ YES □ NO
Is the distance between side rails less than 12 cm? □ YES □ NO
Is the distance between lower side rail and the mattress
support platform less than 12 cm?
□ YES □ NO
Is the distance between top of the mattress and the top
edge of the top side rail at least 22 cm?
□ YES □ NO
Is it safe and simple to lock and unlock the side rails? □ YES □ NO
Are side rails distorted with a load? □ YES □ NO
Is the CPR function working properly with a load of the
back rest (if applicable)?
□ YES □ NO
Description of defects (if applicable):
_______________________________________________________
_______________________________________________________
_______________________________________________________
IV. Results of the inspection