Elbur B 521 II, Инструкция

Страница: 24 / 36

ELBUR: PB 521 II, PB 526 II
Elbur sp. z o.o. sp.k. 24 of 36
7.4. Castors operating (does not apply for
PB 521 II)
Warning
Make sure that all castors have their brakes applied when patient
is on the nursing bed and location is not going to change.
7.4.1. ELBUR PB 526 II
There should be access to castors at all the time.
They have to be placed along the bed before locking
them.
For the purpose of activating the brake push the foot
lever down as far as it goes.
For the purpose of deactivating the brake push the
foot lever toward the corner pole as far as it goes.
7.5. Movements of nursing beds (does not apply
for PB 521 II)
Note
Two people are required to transport patient on the nursing bed, duo to
force the propulsion.
Prior to moving bed to different position follow safety rules indicated below:
•
mattress support platform has to be in flat and horizontal position,
• side rails has to be latched and in upper position,
• unplug the mains power cable and secure it in the power cable holder,
• check technical condition of castors,
•
make sure that mattress support platform is in the lowest position,
•
unlock brakes on castors in PB 526 II,
•
nursing bed is ready to move.
After moving:
•
plug-in the mains power cable,
•
power supply cord shall be kept clear of any moving nursing bed part
or mechanism, when it is in use, transport or from friction at sharp
corners and edges within the nursing bed,
•
lock all castors.
7.6. Emergency lowering of the back rest
In an emergency situation, when mains voltage has been interrupted
or failure of electric components, the back rest section can be lowered
manually by disassembling quick-release bolts locking the drive unit under
the mattress support platform.