Elbur B 521 II, Инструкция

Страница: 22 / 36

ELBUR: PB 521 II, PB 526 II
Elbur sp. z o.o. sp.k. 22 of 36
7.1. Electric mattress support adjustment
Warnings
Make sure that hand switch is placed properly, that it is not trapped
between side rails and mattress support platform/other furniture.
It is essential to leave the nursing bed unused for at least 18 minutes,
after maximum period of operation of 2 minutes, which must not be
exceeded.
At the same time only one person can operate the bed. It is strictly
prohibited to press all buttons simultaneously on the hand switch.
The electric adjustment range of height or angle of mattress support
platform is possible only within a predetermined range. The electrical
adjustments can be made using the hand switch, which functions are
described below.
Height adjustment range is 35,5 ÷ 76,5 cm for ELBUR PB 521 II,
39, 0 ÷ 80,0 cm for ELBUR PB 526 II. Angle adjustment range for back rest
section, upper leg rest section and lower leg rest section is 0 ÷ 70° , 0 ÷ 32° ,
0 ÷ 20° respectively.
If necessary, it is possible to block individual functions of the bed using the
attached blue key. For this purpose insert the key into proper holes
in the middle of the handset:
• turn the key right - the green light will turn into yellow, which means
that this function has been disengaged,
activated
disabled