6
Speed Dial
Press the Call button “
” on the control panel for 3 seconds: the panel auto-dials the first
stored phone number. Press the Call button “
” to end the call.
Hands-free Phone Call from the Panel
Through GSM
Press the Call button“
” on the control panel, type the phone number you wish to call and press
the Call button “
” again.
Record / Play a Voice Memo
Long press the Record Voice Memo button to record a 10-second voice message. The Play Voice Memo Button
blinks when a message has been recorded. Push the center of the RFID reader in the control panel to listen to the
voice memo. The LED indicator turns off when the voice memo is being played. Touch it again to replay the memo.
Hard Reset
Turn the control panel on. Press the tamper switch at the back of the control panel 5 times
wirthin 5 seconds after having turned it on.
Settings will be restored to default values. Stored phone numbers and connected accessories
will be cleared.
7
Setup from the control panel
The SS1 must be set up before using for the first time. During the setup of the system, the control
panel can be powered either by the AC power adapter or by the backup batteries.
Default codes
-
Admin code (necessary to set up your system): 123456
-
User code (necessary to disarm your system or stop the alarm): 1234
-
Duress code: 0000 (enables you to trigger a duress alarm)
-
Open door code: 8888 (enables you to open an electronic door lock plugged to your
control panel and disarm your system or stop the alarm)
All access codes can be changed. We recommend you to change these codes before
using your system for the first time.
The control panel of your alarm system features an LCD display that enables you to navigate
through the menu of the control panel and set up your alarm system.
To enter the setng menu, In disarm status, then
(
your admin code
+
Enter
)
on the control panel.
In the table on the next page, each column represents a menu or a sub menu. Each menu or
submenu will be displayed on one of the two lines of the LCD display. On the LCD display, the
current menu, submenu, or setting is shown on the line at the bottom, while the previous menu
or submenu is shown on the line at the top.
Navigate and select the setting you wish to modify with the keys
“
”
or
“
”
, and enter
each menu or sub menu by pressing “
Enter
”.
How to use the keyboard
“
*
“ = delete
“
” = move forward
“
” = move backward
“
Enter
” = select / confirm
“
Esc
” = back / previous step in the menu / cancel
The tables on the next pages summarize all the settings that can be accessed and modified on
the control panel.
