21
20
Rename RFID Tag
Send:
Rename RFID tag names:
1.
2.
3.
4.
Copy, paste, then edit
(case sensitive):
Rename RFID tag names:
1. Tom
2. Nurse
3. Nancy
4. David
Ok
Note
The first SMS number will receive SMS
notifications when the system is disarmed
by RFID tag. To start receiving these
notifications, you must rename the RFID
tags. Up to 4 RFID tags can be renamed.
Other tags will be attributed a number based
on the order of registration to the control
panel. Refer to the instructions on page 8
to learn how to register an RFID tag in the
control panel.
Entry and Exit Delay Time
Send:
Entry delay time(0-300sec):0
Exit delay time(0-300sec):0
Copy, paste, then edit
(case sensitive):
Ok
Note
This function can be used if you do not want to bring
a remote control or a RFID tag with you.
When you arm the system, the system will be
armed after the delay set. When you disarm the
system, the system will be disarmed after the
delay set.
When arming the system, you hear one beep
every second to remind you to leave. The beep
rhythm speeds up during the last 10 seconds.
If an intruder is detected, the alarm will be
delayed accordingly.
Siren Volume and Ringing Time
Send:
Siren volume(0=Mute,1=High):1
Siren ringing time(1-9min):3
Copy, paste, then edit
(case sensitive):
Ok
Disarm Password
Send:
Disarm password (4 digits):
1234
Copy, paste, then edit
(case sensitive):
Disarm password (4 digits):
4321
Ok
13
12
10
11
Entry delay time(0-300sec):10
Exit delay time(0-300sec):20
Siren volume(0=Mute,1=High):0
Siren ringing time(1-9min):5
