ELBRO ST-SK1 Скачать руководство пользователя страница 17

33

32

Precautions  

For a safer use of the product and to optimize the lifespan of the product, we recommend you 

to follow the precautions below:

The wireless accessories must be connected to the control panel.

Low power voltage may affect transmission distance.

Do not press the SOS key on the remote control if it is unnecessary to avoid

     

disturbing 

neighborhood.

-    Check  the  system  regularly  to  make  sure  the  system  works  properly.

-    The  control  panel  is  neither  waterproof  nor  moisture-proof,  install  it  in  a  shady, 

      cool  and  dry  place.

-    The  case  of  the  control  panel  is  made  of  ABS  plastic.  Keep  away  from  bright  light  for

      a  longer  lifespan.

-      The  control  panel  is  not  explosion-proof.  Keep  away  from  fire  and  flames.

-      Install  the  control  panel  away  from  objects  such  as  heater,  air  conditioner, 

        microwave  oven  etc.  that  generate  heat  or  electromagnetic  fields.

-      Dispose  of  the  batteries  according  to  local  regulations.

-      Dismantling  of  this  product  must  be  done  by  professional  personnel  only.

Standards

   

This product bears the selective sorting symbol for waste electrical and electronic equipment 

(WEEE).  This  means  that  this  product  must  be  handled  pursuant  to  European  Directive 

2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment.

For further information, please contact your local or regional authorities.

Electronic products not included in the selective sorting process are potentially dangerous for the 

environment and human health due to the presence of hazardous substances.

In compliance with European laws. This product is in compliance with the essential requirements 

and other relevant provisions of Directive 1999/5/EC. 

This product was designed and manufactured in compliance with Directive 2002/95/EC of the 

European Parliament and of the Council on the restriction of use of certain hazardous substances 

in electrical and electronic equipment (RoHS Directive - RoHS) and is deemed to comply with 

the maximum concentration values set by the European Technical Adaptation Committee (TAC).

Manufactured in China.

ST-SK1

-C-UM-EN20141120-1.0-W

Содержание ST-SK1



















Отзывы: