Elba VETRO EDDH-C9046STSS, Инструкция по эксплуатации

Страница: 11 / 13

Fig.22
Instruction pattern: Fig.22
A == Lamp
B == Stalls 1 / regulation / off
C == The digital display(Timing and gear display)
D == Stalls 3/ regulation / off
E == Lift button
CAUTION
：
Only when the E button indicator lights, suction outlet during the ascent to set the
start function (stall, delay, lamps and other functional parts) any other circumstances can not be
set other function keys
。

Hold down the button on the E key for 1.5 seconds, the button lights, electric pole rise in order
to promote the rise of suction outlet.
Press the E key and then a short, rising pause, then a short time you press the E key, continue to
rise; (if paused long press the E key for 1.5 seconds, electric pole into decline) rose to the highest
point, the push rod automatically stop working. You can open the hood.
When the hood at the highest point, press the button E 1.5 seconds, the button indicator light
turns off, electric rod decline, while the suction outlet drop, then any other feature to
automatically shut down the process of decline, if press the E key, down to pause and then a long
time you press the E key, continue to decline; (pause, short press the E key, electric pole into rising)
reduced to the lowest point of the moment, the push rod automatically stop Cong push rod to stop
working.

When the button is pressed the A button light will turn on the lights, if you want to turn off the
lights, and just once again press the button
。

When you press the button B digital display C 01, will run the first speed, if you want to stop
running, just once again press the button B, the digital display 00
。

When you press the button D digital display C 01, will run the first speed, press this key
followed by 1,2,3,4,0 stall cycle
。
CAUTION
：
The first speed 01 second speed display 02, the third speed display 03, the fourth speed
04, B, and D keys stalls regulation
。