Elba ETP-C4221, Руководство пользователя

Страница: 5 / 11

5
CONTROL PANEL
HOW TO ATTACH AND REMOVE THE LID
Detaching Lid
Place the handle towards the rear side of the appliance. Open the lid by lifting the lid opening
lever (beware of hot steam emitted from the water tank and steam vent). Position the lid at a
45

angle and pull out the lid from the hinge holder by pressing the hinge lock.
NOTE: Never remove the lid while the appliance is operating.
Attaching Lid
Place the handle towards the rear side of the appliance. Press the hinge lock, at the same time
insert the shaft of the hinge on the lid into the hinge holder. Ensure that lid is attached properly.
Close and press on lid until it clicks.
OPERATING THE APPLIANCE FOR THE FIRST TIME
1. Wash and rinse the water tank with clean water.
2. Do not fill the water more than the full line marking. Please refer to the maximum water level
marking under the product descriptions. If the appliance is overfilled, it may cause splashing,
which might arise a hazard to the user.