Elba ETP-C4221, Руководство пользователя

Страница: 8 / 11

8
To reboil water under keep warm mode
1. Reboil a full tank of water will take about 3
minutes.
2. Before reboiling, make sure the water level
is above the
“REFILL” line. Refer to the
water level indicator for the marking.
3. T
he “REBOIL” button may not function
right after the water has boiled.
4. When adding water to the water tank, be
careful of the hot steam while opening the
lid.
5. Once the
“REBOIL” button is pressed, the
boiling process cannot be reset until the
appliance automatically switches to the
“KEEP WARM” mode.
6. Do not press the
“REBOIL” button
repeatedly, as the continuous reboiling
process will cause malfunction to the
appliance.
When not in use
When the appliance is not in use, unplug and
remove the remaining water from the water
tank.
1. Press the manual pump to pour out the
remaining hot water slowly from the water
tank.
2. Allow the appliance to dry thoroughly.
3. Do not place the appliance in a dishwasher
or dish dryer as this will cause damage to
the appliance.
4. If not in use, seal in a plastic bag to protect
it from dust and insects.
AUTO-CUT OFF FUNCTION
1. When the water boil-dry, the appliance will automatically cut off the power.
2. The auto cut-off function will also operate when:

The power is switched on, but no water inside the water tank.

Water
level is below the “REFILL” line. Refer to the water level indicator for the marking.
CLEANING AND MAINTENANCE
1.
Always allow the appliance to cool down before cleaning.
2.
Remember to unplug the receptacle from the product body.
3.
Detach the lid and pour out remaining water.
4.
If mineral deposits are allowed to accumulate, loud noises may be heard during boiling and
you may face difficulties in dispensing hot water. Regular cleaning will avoid such problems.