Elba ELSC 90 DF Скачать руководство пользователя

Страница: 5 / 36

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT

IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC

At the end of its working life, the product must not be disposed of as

urban waste. It must be taken to a special local authority differentia-

ted waste collection centre or to a dealer providing this service.

Disposing of a household appliance separately avoids possible ne-

gative consequences for the environment and health deriving from

inappropriate disposal and enables the constituent materials to be

recovered to obtain significant savings in energy and resources. As a

reminder of the need to dispose of household appliances separately,

the product is marked with a crossed-out wheeled dustbin.

•

Do not line the oven walls with aluminium foil. Do not place baking trays or the drip tray

on the base of the oven chamber.

•

The manufacturer declines all liability for injury to persons or damage to property cau-

sed by incorrect or improper use of the appliance.

•

The various components of the appliance are recyclable. Dispose of them in accor-

dance with the regulations in force in your country. If the appliance is to be scrapped,

remove the power cord.

•

Always use oven gloves when removing the shelves and food trays from the oven

whilst hot.

•

Do not hang towels, dishcloths or other items on the cooker or its handle – as this

could be a fire hazard.

•

Clean the oven regularly and do not allow fat or oils to build up in the oven base or

trays. Remove spillages as soon as they occur.

•

Do not stand on the cooker or on the open oven door.

•

Always stand back from the cooker when opening the oven door to allow steam and

hot air to escape before removing the food.

•

Safe food handling:

Leave food in the oven for as short a time as possible before

and after cooking. This is to avoid contamination by organisms which may cause food

poisoning. Take particular care during warmer weather.

•

Do not operate your appliance by means of an external timer or separate remote-

control system.

•

This appliance is for domestic use only.

Содержание ELSC 90 DF





































Результаты поиска

Содержание ELSC 90 DF

Отзывы:

Похожие инструкции для ELSC 90 DF

Бренды по названию

Популярные бренды

Elba ELSC 90 DF, Инструкция по эксплуатации

Результаты поиска

Содержание ELSC 90 DF

Отзывы:

Похожие инструкции для ELSC 90 DF

Бренды по названию

Популярные бренды