30
plug
Fig. 8.1
Gas Connection
GB
Cat: II 2H3+
Before starting the gas connection fit the 1/2” BSP male connector to the right or left inlet
pipe terminal.
The gas supply must use the nearest gas inlet pipe which is located at the left or the right
hand side at the rear of the appliance (fig. 8.1).
The hose should also be connected in such away that it does not touch the floor.
To screw the connecting tube operate with two spanners (fig. 8.2).
The unused end inlet pipe must be closed with the plug interposing the gasket.
After connecting to the mains, check that the coupling are correctly sealed, using
soapy solution, but never a flame.
Gasket
Fitting the 1/2” BSP
(male) connector
The male
connector is
supplied
with the appliance
in a separate kit
1/2” BSP (male)
Fitting the plug on the
inlet pipe terminal not used
Cooker manifold
(Right or left
inlet pipe)
Manifold
male pipe fitting
Gasket (#)
Plug (#)
(#) Already fitted on the
right or left inlet pipe
1/2” G cylindrical
(ISO 228-1) male
1/2” G cylindrical
(ISO 228-1) female
Fig. 8.2
Right gas inlet pipe
Left gas inlet pipe
Plug
Содержание ELSC 90 DF
Страница 2: ...2 ...
Страница 18: ...18 S F C T Fig 6 1 Fig 6 2 A B S T Fig 6 3 Fig 6 4 Fig 6 5 ...