Elba EL 810 Скачать руководство пользователя страница 46

46

ELECTRICAL SECTION

4

GENERAL

• 

The connection to the electrical 

network must be carried out by qualified 

personnel and must be according to 

existing norms.

• 

The appliance must be connected to 

the electrical network verifying above 

all that the voltage corresponds to the 

value  indicated  on  the  specifications 

plate and that the cables section of the 

electrical plant can bear the load which 

is also indicated on the plate.

• 

If the appliance is supplied without a 

power supply plug and if you are not 

connecting directly to the mains, a 

standardized plug suitable for the load 

must be fitted.  

• 

The colours of the wires in the appliance 

power cable may not correspond with 

the colours marked on the terminals of 

your electrical plug. The plug should 

always be wired as follows:

 

– connect the green/yellow wire to the 

terminal marked with the letter “

E

” 

or the earth symbol    or coloured 

green/yellow;

 

– connect the blue wire to the terminal 

marked with the letter “

N

” or coloured 

black;

 

– connect the brown wire to the 

terminal marked with the letter “

L

” or 

coloured red.

• 

The bi-polar plug must be connected to 

an outlet connected to the grounding 

unit in conformity to security norms.

• 

If the oven is to be connected directly 

to the mains, it must be placed with  

an omnipolar switch with minimum 

opening between the contacts of 3 mm 

between the appliance and the mains. 

• 

The power supply cable must not touch 

the hot parts and must be positioned 

so that it does not exceed 75°C at any 

point.  

• 

Once the oven has been installed, 

the switch or socket must always be 

accessible. 

• 

If the power supply cable is damaged it 

must be substituted by a suitable cable 

available in the after sales service.

N.B. For connection to the mains, do 

not use adapters, reducers or branching 

devices as they can cause overheating 

and burning.

 

If the installation requires alterations to the 

domestic electrical system call an expert. 

He should also check that the domestic 

electrical system is suitable for the power 

absorbed by the appliance.

Before effecting any intervention on 

the electrical parts the appliance must 

be disconnected from the network.

The connection of the appliance to the 

grounding unit is mandatory. 

The manufacturer declines every 

responsability for any inconvenience 

resulting from the inobservance of this 

condition. 

Содержание EL 810

















































Отзывы: