29
ADVICE FOR USE AND MAINTENANCE OF CATALYTIC PANELS (SUPPLIED
WITH SOME MODELS ONLY)
The catalytic panels are covered with special microporous enamel which absorbs and does
away with oil and fat splashes during normal baking over 200°C.
If, after cooking very fatty foods, the panels remain dirty, operate the oven “idling” on max
temperature for about 30 minutes.
These panels do not require to be cleaned, however it is advised to periodically remove
them from the oven (at least the side panels) and to wash them with tepid soapy water and
then wipe off with a soft cloth.
DO NOT CLEAN OR WASH THEM WITH ABRASIVE PRODUCTS OR WITH PRODUCTS
CONTAINING ACIDS OR ALKALIS.
The side panels are reversible and when the catalytic microporous enamel degrades, they
can be turned to the other side.
GREASE FILTER (SUPPLIED WITH SOME MODELS ONLY)
•
A special screen is provided at the back of the oven to catch grease particles, mainly
when meat is being roasted (fig. 2.7).
•
Clean the filter after any cooking!
The grease filter can be removed for cleaning and should be washed regularly in hot
soapy water (fig. 2.7).
•
Always dry the filter properly before fitting it back into the oven.
CAUTION:
When baking pastry etc. this filter should be removed.
Fig. 2.7
