Elba EL 731 Скачать руководство пользователя

Страница: 12 / 44

DEFROSTING FROZEN FOODS

(

Only for the “fan assisted” models -

models having also the position

fan motor, on the oven light/rotisserie

control knob)

FAN MOTOR ONLY

Switch on the fan motor only.

The oven thermostat control knob shall be

in the “

”, “ ” or “

” (OFF) position.

The defrosting is done by simple ventilation

without heat.

USE OF THE GRILL

Very important: The grill must always be

used with the oven door closed.

Turn on the grill, as explained in the prece-

ding paragraphs and let the oven preheat

for about 5 minutes with the door closed.

Introduce the food to be cooked, positio-

ning the rack as close to the grill as pos-

sible.

The dripping pan should be placed under

the rack to catch the cooking juices and

fats.

Note: It is recommended that you do not

grill for longer than 30 minutes at any

one time.

Attention: The oven door becomes very

hot during operation. Keep children

away.

OVEN LIGHT

The oven provides an interior lamp to allow

the visual inspection during the cooking.

To light the oven lamp turn the knob (fig.

2.6 or 2.9) to the symbol .

ROTISSERIE

The oven is fitted with a rotisserie.

To operate the rotisserie motor turn the

knob indicated in fig. 2.6 or 2.9 to

po-

sition.

For the correct use see specific instructions

in the section “USING THE ROTISSERIE”.

Fig. 2.8

Fig. 2.9

NOTES: The knob and symbols may vary.

The symbols may be printed on the knob

itself.

Содержание EL 731













































Результаты поиска

Содержание EL 731

Отзывы:

Похожие инструкции для EL 731

Бренды по названию

Популярные бренды

Elba EL 731, Инструкция по использованию

Результаты поиска

Содержание EL 731

Отзывы:

Похожие инструкции для EL 731

Бренды по названию

Популярные бренды